We switched out a teachers computer recently an now have a set up that consist of a laptop (Lenovo T430) and a wide screen monitor (Lenovo LS2023wide). Many teachers are using the set up by creating the extended screen. I am having difficulties getting the set-up figured out and can not seem to get the picture to project onto the screen correctly either way I configure the set-up. We are using a PRM-20AVS1 Projector - fixed and an 87 inch Pro387 Board 1st Setup: Laptop is the main screen and the monitor is the extended/2nd screen. Desired effect is to use the monitor screen for projector also. I can get the image to show but I can not get it to align, or fill the screen and once I adjust settings in projector the computer looses it when it gets shut down and will not auto adjust to previous setting. What is the ideal resolution- aspect ratio (4:3, 16:9, 16:10) and picture (full normal true) for this setup,and how do we get it to save. 2nd Set up: The monitor is the main screen and the laptop is the second/extended screen. How do I get the board to recognize the laptop screen as the projector screen? also same as set up one. What is the ideal resolution- aspect ratio (4:3, 16:9, 16:10) and picture (full normal true) for this setup, and how do we get it to save.
↧